Kontakt:

email: Ova adresa el. pošte je zaštićena od spambotova. Omogućite JavaScript da biste je videli.

telefon: +381 21 485 2449

kancelarija: Japan 

 

Konsultacije:

PON	UTO	SRE	ČET	PET

 

Predmeti:

• Metode optimizacije
• Digitalni upravljački sistemi

---

Reprezentativne reference

 

NIVO STUDIJA	KRITERIJUM PRODUKCIJE	GRUPA NAUČNIH OBLASTI	OPIS
	(M21) Rad u vrhunskom međunarodnom časopisu		Matić Dragan, Kulić Filip, Pineda-Sanchez Manuel, Kamenko Ilija: “Support vector machine classifier for diagnosis in electrical machines: Application to broken bar”, Expert Systems With Applications, vol.39 br.10, str. 8681-8689, 2012.
	(M21) Rad u vrhunskom međunarodnom časopisu		Čongradac Velimir, Kulić Filip: “Recognition of the importance of using artificial neural networks and genetic algorithms to optimize chiller operation”, Energy and Buildings, vol. 47, str. 651-658; April 2012.
	(M21) Rad u vrhunskom međunarodnom časopisu		Čongradac Velimir, Kulić Filip: “HVAC system optimization with CO2 concentration control using genetic algorithms”, Energy and Buildings, vol. 41 br. 5, str. 571-577, 2009.
	(M23) Rad u međunarodnom časopisu		Ilić Slobodan; Vukmirović Srđan; Erdeljan Aleksandar; Kulić Filip: “Hybrid Artificial Neural Network System for Short-Term Load Forecasting, Thermal Science, vol.16, br. , str. S215-S224, 2012
	(M23) Rad u međunarodnom časopisu		Kulic Filip, Matić Dragan, Dumnić Boris, Vasić Veran; “Optimal Fuzzy Controller Tuned by TV-PSO for Induction Motor Speed Control”; Advances in Electrical and Computer Engineering, vol. 11 br. 1, str. 49-54, 2011.
	(M23) Rad u međunarodnom časopisu		Oros Đura; Vasić Veran, Marčetić Darko, Kulic Filip; “Influence of parameters detuning on induction motor NFO shaft-sensorless scheme”, Advances in Electrical and Computer Engineering, vol. 10 br. 4, str. 121-124, 2010.
Osnovne akademske studije	(U01) Osnovni udžbenik za nastavni predmet	Elektrotehničko i računarsko inženjerstvo	Dragan Kukolj, Vesna Bengin, Filip Kulić: Osnovi klasične teorije automatskog upravljanja kroz rešene probleme, Sombor, Somel, 1995. 241str., UDK: 681.5(075.8),
Osnovne akademske studije	(U01) Osnovni udžbenik za nastavni predmet	Elektrotehničko i računarsko inženjerstvo	Dragan Kukolj, Filip Kulić: Projektovanje sistema automatskog upravljanja u prostoru stanja, Novi Sad, Fakulet tehničkih nauka, 1995. 232str., UDK: 681.5(075.8),
Doktorske studije	(M22) Rad u istaknutom međunarodnom časopisu	Elektrotehničko i računarsko inženjerstvo	D.Kukolj, F.Kulić, E.Levi: Design Of The Speed Controller For Sensorless Electric Drives Based On AI Techniques: A Comparative Study, Artificial Intelligence in Engineering, 2000, Vol. 14, str. 165- 174
Doktorske studije	(M22) Rad u istaknutom međunarodnom časopisu	Elektrotehničko i računarsko inženjerstvo	D.Kukolj, S.Kuzmanović, E.Levi, F.Kulić: Design of Near Optimal, Wide Range Fuzzy Logic Controller, Fuzzy Sets and Systems, 2001, Vol. 120, No. 1, str. 17- 34
Doktorske studije	(M23) Rad u međunarodnom časopisu	Elektrotehničko i računarsko inženjerstvo	D.Kukolj, F.Kulić, D.Popović, Z.Gorečan: Determining Topological Changes and Critical Load Levels of a Power System by Means of Artificial Neural Network, Electric Machines and Power Systems, 1997, Vol. 25, No. 8, str. 917- 926, ISSN 0731-356x.
Doktorske studije	(M23) Rad u međunarodnom časopisu	Elektrotehničko i računarsko inženjerstvo	D.Kukolj, D.Popović, F.Kulić, Z.Gorečan: Fast Dynamic Stability Analysis of a Power System Using Artificial Neural Networks, European Transactions on Electrical Power (ETEP), 1998, Vol. 8, No. 3, str. 207- 212, ISSN 1430-144X.
Doktorske studije	(M23) Rad u međunarodnom časopisu	Elektrotehničko i računarsko inženjerstvo	D.Popović, D.Kukolj, F.Kulić: Monitoring and Assessment of Voltage Stability Margins Using Artificial Neural Networks with a Reduced Input Set, IEE Proc. -Gener. Transm. Distrib, 1998, Vol. 145, No. 4, str. 355- 362, ISSN 1350-2360.

---

....CURRICULUM VITAE

 

 

November 2016.

 

 

FILIP KULIC

 

 

 

I PERSONAL DATA:

Family name:	KULIC
First name:	FILIP
Middle name:	JOSIP
Date of birth:	31. JULY 1968.
Place of birth:	SOMBOR, SERBIA
Marital status:	MARRIED
Business address:	COMPUTING AND CONTROL DEPARTMENT FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD TRG DOSITEJA OBRADOVICA 6 21000 NOVI SAD VOJVODINA SERBIA
Business phone:	+381 21 4852252
Mobile phone	+381 63 540431
Business fax:	+381 21 458873
e-mail:	Ova adresa el. pošte je zaštićena od spambotova. Omogućite JavaScript da biste je videli.
Home address:	DALMATINSKA 16A 21000 NOVI SAD SERBIA
Home phone:	+381 21 4740340

 

II EDUCATION:

1988. – 1994.
Degree:	DIPLOMA OF ELECTRICAL ENGINEERING
	(B.Sc.E.E.)
Date:	08.07.1994.
Grade point average:	7.87 (10.0 = maximum)
Place:	NOVI SAD, SERBIA
Institution:	FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD, SERBIA
B.Sc. thesis title:	PARAMETER SYNTHESIS OF SUBOPTIMAL COORDINATED SECUNDAR VOLTAGE REGULATOR
1994. – 1999.
Degree:	MASTER OF ELECTRICAL ENGINEERING
	(M.Sc.E.E.)
Date:	20.07.1999.
Grade point average:	10.00 (10.0 = maximum)
Place:	NOVI SAD, SERBIA
Institution:	FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD, SERBIA
M.Sc. thesis title:	ARTIFICIAL INTELLIGENCE METHODS IN DC MOTOR SPEED CONTROL
1999. – 2003.
Degree:	DOCTOR OF TECHNICAL SCIENCES (Ph.D.)
Date:	11.07.2003.
Place:	NOVI SAD, SERBIA
Institution:	FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD, SERBIA
Ph.D. thesis title:	MODERN CONTROL TECHNIQUES APPLICATION TO POWER SYSTEMS

III FOREIGN LANGUAGES:

Reading:	ENGLISH
Speaking:	ENGLISH
Writing:	ENGLISH

IV EMPLOYMENT:

a.      Professional career

01.September 1994. – 31.October 1999.
Place:	NOVI SAD, SERBIA
Institution:	INSTITUTE FOR COMPUTER SCIENCES AND AUTOMATIC CONTROL FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD
Occupation:	ASSOCIATE ENGINEER
01.November 1999. – 09.November 2003.
Place:	NOVI SAD, SERBIA
Institution:	INSTITUTE FOR COMPUTER SCIENCES AND AUTOMATIC CONTROL FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD
Occupation:	TEACHING AND RESEARCH ASSISTANT
10.November 2003. – 7.September 2008.
Place:	NOVI SAD, SERBIA
Institution:	COMPUTING AND CONTROL DEPARTMENT FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD
Occupation:	ASSISTANT PROFESSOR
8.September 2008. – 7.September 2013.
Place:	NOVI SAD, SERBIA
Institution:	COMPUTING AND CONTROL DEPARTMENT FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD
Occupation:	ASSOCIATE PROFESSOR
8.September 2013. – until now
Place:	NOVI SAD, SERBIA
Institution:	COMPUTING AND CONTROL DEPARTMENT FACULTY OF TECHNICAL SCIENCES UNIVERSITY OF NOVI SAD
Occupation:	FULL PROFESSOR

b.      Participation in the work of the bodies of the Faculty and the University

·         Head of the Chair for automatic control at Faculty of technical sciences; 2009-2012.

·         Vice dean for science and international cooperation at Faculty of technical sciences; 2012-2013.

·         Member of the Expert council for technical and technological sciences at University of Novi Sad, 2010-present.

c.       Economic activities

·         Co-founder and partly owner of company FTN IDEEA Ltd., 2006-present

V TEACHING EXPERIENCE:

d.      Developed and taught the new courses:

1. PROJECT DOCUMENTATION IN AUTOMATION one semester course, with 2 hours per week (total of 30 hours) of lectures, in the fourth year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2003. – 2007.

Contents/structure of the subject:

1.      Introduction (problem defining, project task, types of projects and their contents: study of justifying, ideological, general, main, executable and project of the worked out state; project revision; law regulation and recommendation for projecting)

2.      Standards (structure and contents of standards in connection with project working out for electric, machinery and process industry; main domestic and international standards: JUS, ANSI, ISA, ISO, IEEE, IEC, DIN, VDE...)

3.      Technical documentation (standard graphical symbols; signs; schemes; diagrams; tables)

4.      Modern software for technical documentation working out (E-plan...)

5.      Supervision and realization of projects

6.      Project managing (Microsoft project)

7.      Working out of concrete project (process industry; electric drive; water, electric and gas supplying systems; transport systems...)

2. AUTOMATION IN POWER ENGINEERING one semester course, with 3 hours per week (total of 45 hours) of lectures, in the fourth year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2003. – 2007.

Contents/structure of the subject:

1.      Power sources and protection devices in automatic control

2.      Automatic protection devices (types, basic principes and construction)

3.      Electric driving devices (basic principles, types, elements and characteristics)

4.      Regulators and actuators

5.      Application of computer control techniques in power engineering

6.      Power system control (power, frequency and voltage control principles; generator regulation; regulation in power plant and transmission network)

3. CONTROL SYSTEMS TECHNOLOGIES one semester course, with 4 hours per week (total of 60 hours) of lectures, in the third year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2003. – until now.

Contents/structure of the subject:

1.      Systematic engineering approach and computer controlled systems.

2.      Theoretical fundamentals for understanding and carrying out laboratory practices on industrial training facilities (temperature control; level, flow control, Ph value control, AC motor control; control of a robot’s arm, digital signal processing), as well as for understanding processes which will be visited in industry.

3.      Electric driving devices (basic principles, types, elements and characteristics)

4.      Regulators and actuators

5.      Survey of current projects in field of computer automatic control, made for industrial purposes including basics in PLC and SCADA systems programming.

6.      Visiting industrial plants, and specialized institutions in which technologies of bioengineering are used, for introducing modern tools for computer controlled systems.

4. INTELLIGENT SYSTEM CONTROL one semester course, with 4 hours per week (total of 60 hours) of lectures, in the fifth year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2003. – until now.

Contents/structure of the subject:

1.      Neural networks in identification, diagnostics and predictive control

2.      Fuzzy control systems

3.      Genetic algorithms and particle swarm optimization

4.      Support vector machines with application to system identification, time series prediction, system modeling and control

5.      Neural-fuzzy control systems: fuzzy logic and neural network

5. PROJECTING OF AUTOMATIC CONTROL SYSTEMS one semester course, with 4 hours per week (total of 60 hours) of lectures, in the fourth year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2007. – until now.

Contents/structure of the subject:

1.      Power sources and protection devices in automatic control

2.      Industrial electrical installation

3.      Types of electric networks and automatic protection devices

4.      Electric switching devices and relay schemes

5.      Introduction to control systems projecting (problem defining, project task, types of projects and their contents: study of justifying, ideological, general, main, executable and project of the worked out state; project revision; law regulation and recommendation for projecting)

6.      Standards (structure and contents of standards in connection with project working out for electric, machinery and process industry; main domestic and international standards...)

7.      Technical documentation (standard graphical symbols; signs; schemes; diagrams; tables, P&I diagrams)

8.      Modern software for technical documentation working out (AutoCAD, E-plan...)

9.      Supervision and realization of projects

10.  Project managing (Microsoft project)

11.  Working out of concrete project (process industry; electric drive; water, electric and gas supplying systems; transport systems...)

 

6. AUTOMATIC CONTROL SYSTEMS IN POWER ENGINEERING one semester course, with 3 hours per week (total of 45 hours) of lectures, in the third year of the graduate program. University of Novi Sad, Faculty of Technical Sciences, 2007. – until now.

Contents/structure of the subject:

1.      Root locus method

2.      Control systems analysis and synthesis in frequent domain: Nyquist stability criterion, stability margins,  Bode method for control systems synthesis.

3.      State space concept

4.      State space method for system synthesis

5.      Robust systems

6.      Synthesis of industrial controllers: PID controllers

7.      Elements of digital control systems

 

 

 

e.       Taught the courses:

1. CONTROL SYSTEMS BASICS: one semester course, with 4 hours per week (total of 60 hours) of lecturers, in the second year of the undergraduate program. University of Novi Sad, Faculty of Technical Sciences, 2003. – until now.

Contents/structure of the subject:

1.      Basic terms and principles of control systems.

2.      Mathematical modeling of continual linear and nonlinear systems.

3.      Performances of steady-state and transient regimes.

4.      Stability analysis of systems by analytical methods.

5.      Root locus method

6.      Control systems analysis and synthesis in frequent domain: Nyquist stability criterion, stability margins,  Bode method for control systems synthesis.

7.      State space concept

8.      Synthesis of industrial controllers: PID controllers

9.      Elements of digital control systems

10.  Application of computers in control.

f.        Conducted the exercises for the courses:

1.      AUTOMATIC CONTROL SYSTEMS: one semester course, with 4 hours per week (total of 60 hours) of exercises, in the second year of the undergraduate program. University of Novi Sad, Faculty of Technical Sciences, 1994. – 2003.

2.      CONTROL OF COMPLEX SYSTEMS: one semester course, with 2 hours per week (total of 30 hours) of exercises, in the fourth year of the undergraduate program. University of Novi Sad, Faculty of Technical Sciences, 1994. – 1997.

3.      EXPERT SYSTEMS IN CONTROL SYSTEMS: one semester course, with 2 hours per week (total of 30 hours) of exercises, in the fifth year of the undergraduate program. University of Novi Sad, Faculty of Technical Sciences, 1994. – 1997.

g.      Was advisor for the Ph.D. thesis

1.      Velimir Congradac: “Artificial intelligence application in realization of supervisory and control systems for residential and business buildings”, defended at Faculty of Technical Sciences Novi Sad, Serbia, July 2009.

2.      Dragan Matić: “Broken bar fault detection in induction motors via methods of computer intelligence”, defended at Faculty of Technical Sciences Novi Sad, Serbia, July 2012.

3.      Vladimir Bugarski: “Expert system for ship lock control based on computational intelligence”, defended at Faculty of Technical Sciences Novi Sad, Serbia, September 2015.

h.      Was advisor for the M.Sc. thesis

1.      Sonja Zivkovic: “Short term load forecasting using support vector machines”, defended at Faculty of Technical Sciences Novi Sad, Serbia, September 2006.

2.      Dragan Matic: “Artificial intelligence application in control of electric drives”, defended at Faculty of Technical Sciences Novi Sad, Serbia, November 2008.

3.      Perica Nikolic: ”Practical solution of supervisory, control and communication systems in process industry”, defended at Faculty of Technical Sciences Novi Sad, Serbia, December 2008.

4.      Ljubomir Francuski: “Fuzzy logic application to squirrel cage motor control”, defended at Faculty of Technical Sciences Novi Sad, Serbia, December 2008.

5.      Veroslav Jankovic: “Realization of power management systems in process industry”, defended at Faculty of Technical Sciences Novi Sad, Serbia, December 2008.

6.      Miroslav Kljajic: „Energy control in industrial thermal energy plants“, defended at Faculty of Technical Sciences Novi Sad, Serbia, May 2010.

7.      Velibor Rajic: “Application of intelligent methods in vector controlled electrical drives”, defended at Faculty of Technical Sciences Novi Sad, Serbia, September 2010.

8.      Vladan Borovic: “Supervisory system for signal acquisition and physical objects spatial location detection”, defended at Faculty of Technical Sciences Novi Sad, Serbia, April 2015.

i.        Was advisor for the diploma projects:

1.        From 2003. more than 150 diploma projects

 

VI RESEARCH EXPERIENCE:

a.      Books

-          In Serbian:

1.        V. Congradac, I. Kamenko, F. Kulic, N. Jorgovanovic: ”Computer aided process control through the solved problems”, Faculty of Technical Sciences, ISBN:978-86-7892-517-7 2013.

2.        F. Kulic, A. Ristić, M. Rapaic; “Automatic control systems”, Faculty of Technical Sciences, ISBN: 978-86-7892-518-4, 2013.

3.        D.Kukolj, V.Bengin, F.Kulic; “Basics of Automatic Control Theory”, Somel, Sombor, ISBN: UDK 681.5 (075.8), 1995.

4.        D.Kukolj, F.Kulic; “Projecting of State Space Control Systems”, Faculty of Technical Sciences, MP "Stylos", Novi Sad, ISBN:UDK 681.5 (075.8); 62-52(075.8), 1995.

b.      Chapters published in books

c.       Papers published in journals:

-          International journals:

1. Todor Bačkalić, Vladimir Bugarski, Filip Kulić, Željko Kanović, „Adaptable Fuzzy Expert System for Ship Lock Control Support“, Journal of Navigation, Published online: 03 May 2016. The Royal Institute of Navigation, ISSN: 0373-4633. http://dx.doi.org/10.1017/S0373463316000242
2. Ilić Slobodan; Vukmirović Srđan; Erdeljan Aleksandar; Kulić Filip; Selakov Aleksandar:“ Short-term load forecasting in large scale electrical utility using artificial neural network“, Journal of Scientific and Industrial Research (JSIR) ISSN: 0022-4456; Vol.72; No.12; pp. 739-745., 2013.
3. Ilić Slobodan; Vukmirović Srđan; Erdeljan Aleksandar; Kulić Filip: “Hybrid Artificial Neural Network System for Short-Term Load Forecasting, Thermal Science, ISSN 0354-9836; vol.16, br. , str. S215-S224, 2012
4. Čongradac Velimir, Kulić Filip: “Recognition of the importance of using artificial neural networks and genetic algorithms to optimize chiller operation”, Energy and Buildings, ISSN 0378-7788 vol. 47, str. 651-658; April 2012.
5. Dragan Matić, Filip Kulić, Manuel Pineda-Sanchez, Ilija Kamenko, Support vector machine classifier for diagnosis in electrical machines: Application to broken bar. Expert Systems with Applications, vol.39, no.10, pp.8681-8689, Feb. 2012
6. Filip Kulić, Dragan Matić, Boris Dumnić, Veran Vasić, Optimal fuzzy controller tuned by TV-PSO for Induction motor speed control, Int. Jour. Of Advanced in Electrical and Computer Engineering, vol 11. no. 1, pp.49-54, March 2011, DOI 10.4316/AECE.2011.01008
7. Oros Đura; Vasić Veran, Marčetić Darko, Kulić Filip; “Influence of parameters detuning on induction motor NFO shaft-sensorless scheme”, Advances in Electrical and Computer Engineering, ISSN 1582-7445, vol. 10 br. 4, str. 121-124, 2010.
8. Čongradac Velimir, Kulić Filip: “HVAC system optimization with CO2 concentration control using genetic algorithms”, Energy and Buildings, ISSN 0378-7788  vol. 41 br. 5, str. 571-577, 2009.

9.      S.Ostojin, F.Kulic, G.Svenda, R.Bibic, “Short-Term Electrical Load Forecasting Using Support Vector Machines”, Computers and simulation in Modern Science Vol I, Mathematics and Computers in Science Engineering, A Series of Reference Books and Textbooks, WSEAS Press, ISBN: 978-960-474-010-9, pp.138-142, 2008.

10.  D.Urosevic, V.Jankovic, D.Djukanovic, F.Kulic, “Implementation of clean development mechanism (CDM) methodologies in natural gas CHP plants” New Aspects Of Engineering Mechanics, Structures And Engineering Geology, Mathematics and Computers in Science Engineering, A Series of Reference Books and Textbooks, WSEAS Press, ISBN: 978-960-6766-88-6, pp.19-25, 2008.

11.  D.Kukolj, S.Kuzmanovic, E.Levi, F.Kulic; "Design of Near Optimal, Wide Range Fuzzy Logic Controller", Fuzzy Sets and Systems, Vol.120, Issue 1, 2001, pp.17-34.

12.  D.Kukolj, F.Kulic, E.Levi: "Design Of The Speed Controller For Sensorless Electric Drives Based On AI Techniques: A Comparative Study", Artificial Intelligence in Engineering, Elsevier, Vol.14, 2000, pp.165-174.

13.  D.Popovic, D.Kukolj, F.Kulic: "Monitoring and Assessment of Voltage Stability Margins Using Artificial Neural Networks with a Reduced Input Set ", IEE Proc. -Gener. Transm. Distrib. Vol. 145, No.4, 1998, pp.355-362.

14.  D.Kukolj, D.Popovic, F.Kulic: "The Dynamic System Stability Analysis with Combined Unsupervised and Supervised Learning Methods", Elektrotehniski vestnik, Vol. 65, No.1, 1998, pp.63-68.

15.  D.Kukolj, D.Popovic, F.Kulic, Z.Gorecan: "Fast Dynamic Stability Analysis of a Power System Using Artificial Neural Networks", European Transactions on Electrical Power (ETEP), Vol.8, No.3, 1998. pp.207-212.

16.  D.Kukolj, F.Kulic, D.Popovic, Z.Gorecan; "Determining Topological Changes and Critical Load Levels of a Power System by Means of Artificial Neural Network", Electric Machines and Power Systems, No VIII, 1997., pp.917-926

-          Serbian journals:

1.    Dragan Matić, Duško Lukač, Vladimir Bugarski, Filip Kulić, Perica Nikolić, Computer aided desgign with Eplan Electrical P8 Educational, Journal on Processing and Energy in Agriculture, vol.20, no.2, 102-105, 2015

2.    I. Kamenko, B. Jakovljević, F. Kulić, P. Nikolić, V. Bugarski, “Web based application for visualization of geospatial data in agriculture,” Journal on Processing and Energy in Agriculture, vol. 19, no. 2, pp. 108–111, 2015.

3.    V. Bugarski, P. Nikolić, F. Kulić, D. Matić, I. Kamenko, “Trends in modern SCADA systems,” Journal on Processing and Energy in Agriculture, vol. 19, no. 3, pp. 147–150, 2015.

4.    Perica Nikolić, Vladimir Bugarski, Dragan Matić, Filip Kulić, “Modern supervisory control system in a pneumatic transport system: Practical realization”, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 18(2014), No. 2, p.91-93. ISSN: 1821-4487. UDK: 631.55/56:620.92. Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi (bivše društvo YUPTEP).

5.    Dragan Matić, Željko Kanović, Vladimir Bugarski, Filip Kulić, Dejan Reljić, Đura Oros, Veran Vasić, “Detection of the broken bar fault: A case study for a 3.2 MW induction motor”, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 17(2013), No. 3, p.134-137.

6.    Dragan Matić, Andrea Hrabovski, Vladimir Bugarski, „Implementation of Expert System for Process Control of Fish Processing“, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 16(2012), No. 3, p.116-119.

7.    I. Kamenko, P. Nikolić, D. Matić, F. Kulić, “Web interface of expert system for improving the soil quality,” Journal on Processing and Energy in Agriculture, vol. 16, no. 3, pp. 120–122, 2012.

8.    Perica Nikolić, Vladimir Bugarski, Filip Kulić, Đura Oros, „The Practical Example of Connecting the Plant Processing Industry into a Single Supervisory and Control System“, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 14(2010), No. 2, p.109-111.

9.    Dragan Matić, Filip Kulić, Vladimir Bugarski, „Survey of the Methods for Online Broken Bar Induction Motor Fault Detection“, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 14(2010), No. 2, p.90-92.

10.Vladimir Bugarski, Perica Nikolić, Filip Kulić, „Modern SCADA Systems in Production of Soy Flour and Grits and Textured Soy Proteins“, Journal on Processing and Energy in Agriculture (former PTEP), Vol. 14(2010), No. 2, p.85-89.

11.F. Kulić, V. Janković, Đ. Oros, V. Vasić, “Razvoj i realizacija sistema nadzora i upravljanja tokovima energenata u procesnoj industriji, deo II – napredne funkcije”, Časopis za procesnu tehniku i energetiku u poljoprivredi / PTEP, vol. 13, br. 4, str. 307-311, 2009

12.F. Kulić, V. Janković, Đ. Oros, V. Vasić, “Razvoj i realizacija sistema nadzora i upravljanja tokovima energenata u procesnoj industriji, deo I - osnovni koncept”, Časopis za procesnu tehniku i energetiku u poljoprivredi / PTEP, vol. 13, br. 3, str. 216-221, 2009

13.A.Selakov, F.Kulic, P.Nikolic, Z.Jelicic, D.Petrovacki, “Improvement of Supervisory and control System in Process Industry using WEB and GSM technologies”, Thermo technique, 1 (2009), pp.21-28

14.V.Bugarski, P.Nikolic, Lj.Francuski, F.Kulic, Z.Jelicic, “supervisory and control systems of cooling plants”, Thermo technique, 1 (2009), pp.9-19

15.V.Bugarski, F.Kulic, Lj.Francuski, V.Vasic, “Realization of distributed supervisory and control system for cooling plant” PTEP – Journal on Processing and Energy in Agriculture,, 2008, Vol. 12, No.3, pp.168-170

16.A.Selakov, F.Kulic, P.Nikolic, Dj.Oros, “Application of WEB and GSM technologies in supervisory and control systems for process industry”, PTEP – Journal on Processing and Energy in Agriculture,, 2008, Vol. 12, No.3, pp.171-174

17.F.Kulic, Z.Jelicic, Lj.Francuski, I.Lendak, S.Zaric, “One solution of supervisory and control systems for water supplying systems using wireless communication”, Water economy, 2007, No. 39, pp. 228- 234, ISSN 0350-0519.

18.F.Kulic, V.Congradac, P.Nikolic, “Techno-economical analysis of different types of communication application in supervisory and control systems for water supplying systems”, Water and Sanitary Technique, 2007, Vol. XXXVII, No. 4-5, pp. 45- 53, UDK: 628+624+626, ISSN 0350-5049.           

19.Vladimir Bugarski, Filip Kulic, Zoran Jelicic, Veran Vasic, DJura Oros: “Conception and realization of supervisory and control system for mineral compost production”, PTEP – Journal on Processing and Energy in Agriculture,, 2007, Vol. 11, No. 4, pp. 187- 190, UDK: 62-503.55, ISSN 1450-5029.

20.V.Vasic, DJ.Oros, P.Nikolic, F.Kulic, V.Jankovic, “Technical improving of extractor behaviour in process of vegetable oil production”, PTEP – Journal on Processing and Energy in Agriculture,, 2007, Vol. 11, No. 3, pp. 135- 137.

21.Lj.Francuski, F.Kulic, V.Vasic, DJ.Oros, D.Trzin, V.Jankovic, “Conception and realization of supervisory and control system for peeling plant in factory for vegetable oil production”, PTEP – Journal on Processing and Energy in Agriculture, 2007, Vol. 11, No. 3, pp. 137- 142.      

22.F.Kulic, D.Matic, V.Vasic, DJ.Oros, “Tuning of PI controller of absorption oil temperature in extraction plant in process of vegetable oil production”, PTEP – Journal on Processing and Energy in Agriculture, 2007, Vol. 11, No. 3, pp. 93- 98.

23.F.Kulic, V.Vasic, Dj.Oros, Lj.Francuski, V.Jankovic: “Data Acquisition And Control Software Realization For The Pressing Plant In Vegetable Oil Industry”, PTEP – Journal on Processing and Energy in Agriculture, Vol.10, No.3-4, 2006., pp.89-93.

24.V.Vasic, F.Kulic, Dj.Oros, P.Nikolic, V.Jankovic: “Application of the Profibus Communication Protocol to Control of the Pressing Plant in Vegetable Oil Industry”, PTEP – Journal on Processing and Energy in Agriculture, Vol.10, No.3-4, 2006., pp.77-80.

25.D.Kukolj, D.Popovic, F.Kulic, M.Borota: "Power System Stability Analysis by Supervised and Unsupervized Learned Artificial Neural Networks", Electrical Industry, No. 3, 1996, pp.7-13.

26.D.Kukolj, F.Kulic, D.Popovic, Z.Gorecan; "Power System Topology and Critical Load Detection by Multi Layer Artificial Neural Network ", Electro Technique 45, 5-6, 1996, pp.E12-E17.

d.      Refereed papers published in conference proceedings

-          International conferences

1.      V. Bugarski, P. Nikolić, D. Matić, I. Kamenko, F. Kulić, “Trends in modern SCADA systems,” in Fourth international conference sustainable postharvest and food technologies - INOPTEP 2015, April 19th – 24th, 2015, Divčibare, Serbia, pp. 315–316.

2.      I. Kamenko, B. Jakovljević, F. Kulić, P. Nikolić, V. Bugarski, “Web based application for visualization of geospatial data in agriculture,” in Fourth international conference sustainable postharvest and food technologies - INOPTEP 2015, April 19th – 24th, 2015, Divčibare, Serbia, pp. 354–355.

3.      Filip Kulić, Perica Nikolić, Dragan Matić, Vladimir Bugarski, “Improvement of irrigation system using frequency converter”, Book of abstracts – 4th International Conference Sustainable Postharvest and Food Technologies – INOPTEP 2015, April 19th – 24th, 2015, Divčibare, Serbia, ISBN: 978-86-7520-333-9.

4.      Dragan Matić, Filip Kulić, Ilija Kamenko, Vladimir Bugarski, Perica Nikolić, „Design of Support Vector Machine Classifier for Broken Bar Detection“, Proceedings of 2012 IEEE International Conference on Control Applications (CCA), Part of 2012 IEEE Multi-Conference on Systems and Control, October 3-5, 2012. Dubrovnik, Croatia, ISBN 978-1-4673-4503-3, Institute of Electrical and Electronics Engineers (IEEE), pp. 1670-1673.

5.      Selakov Aleksandar, Ilić Slobodan, Vukmirović Srđan, Kulić Filip, Erdeljan Aleksandar, Gorečan Zvonko; “A comparative analysis of SVM and ANN based hybrid model for short term load forecasting”; 2012 IEEE PES - Transmission and Distribution Conference and Exposition (T&D); pp.1-5; Orlando, FL; 7-10 May 2012. (ISSN: 2160-8555; E-ISBN :  978-1-4673-1933-1; Print ISBN: 978-1-4673-1934-8; INSPEC Accession Number: 12963513; DOI: 10.1109/TDC.2012.6281502)

6.      D. Matić, F. Kulić, "SVM Broken Bar Detection Based on Analysis of Phase Current," 15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe, Novi Sad, Serbia,4.-6. Sept. 2012, LS4c.2-1  2-4, ISBN 978-1-4673-1971-3.

7.      D. Matić, I. Kamenko, and F. Kulić, "TV-PSO Based Method For Tuning of Speed Control Loop Of Induction Drive", T2-1.10, pp. 1-3, 16th International Symposium on Power Electronics, Novi Sad, Serbia, 23-26 October, 2011, ISBN 978-86-7892-356-2.

8.      Slobodan Ilić, Aleksandar Erdeljan, Filip Kulić, Srđan Vukmirović; “Hybrid artificial neural network system for short-term load forecasting”, Proceedings of 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2011); pp: 2538-2546; Novi Sad, Serbia; July 4–7, 2011.

9.      Vukmirović Srđan, Erdeljan Aleksandar, Kulić Filip, Luković Slobodan;” A smart metering architecture as a step towards Smart Grid realization”, 2010 IEEE International Energy Conference and Exhibition (EnergyCon), pp.357-362; Manama, Bahrain; 18-22 Dec. 2010. (Print ISBN: 978-1-4244-9378-4; INSPEC Accession Number: 12007851; DOI: 10.1109/ENERGYCON.2010.5771705)

10.  Vukmirović Srđan, Erdeljan Aleksandar, Kulić Filip, Luković Slobodan; “An enhanced workflow management for Utility Management Systems”, Proceedings on International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT), pp.429-436; Moscow, Russia; 18-20. Oct. 2010. (ISSN :2157-0221; Print ISBN: 978-1-4244-7285-7; INSPEC Accession Number: 11706396; DOI: 10.1109/ICUMT.2010.5676601)

11.  Matić Dragan, Kulić Filip, Pineda-Sanchez Manuel, Pons-Llinares Joan; “Artificial Neural Networks Eccentricity Fault Detection of Induction Motor”; 2010 Fifth International Multi-conference on Computing in the Global Information Technology (ICCGI 2010); pp.1-4 Valencia, Spain; 20-25 September 2010. (IEEE Catalog Number: CFP1040B-PRT; ISBN: 978-1-4244-8068-5)

12.  Dragan Matić, Boris Dumnić, Filip Kulić, Vladimir Bugarski, „Minimal configuration PI fuzzy gain scheduling speed controller in indirect vector control scheme“, Proc. of the 5th IET International Conference on Power Electronics, Machines and Drives, PEMD2010, 19-21.April 2010, Brighton, UK

13.  Miloš Rosić, Vladimir Bugarski, Filip Kulić, Perica Nikolić, Dragan Matić, „Wind Power Forecasting With Neural Networks“, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe – IEEP 2010, Zlatibor, 22-26. June, 2010.

14.  Velibor Rajić, Filip Kulić, Dragan Matić, „A Comparative Overview Of Fuzzy And Pi Regulators When Controling Induction Motor Drives“, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe – IEEP 2010, Zlatibor, 22-26. June, 2010.

15.  Perica Nikolić, Vladimir Bugarski, Dragan Matić, Filip Kulić, „Centralized Data Collection Process Industry Plants With Emphasis On Practical Solutions“, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe – IEEP 2010, Zlatibor, 22-26. June, 2010.

16.  Filip Kulić, Veroslav Janković, Dušan Petrovački, „Development And Realization Of Energy Management System In Process Industry“, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe – IEEP 2010, Zlatibor, 22-26. June, 2010.

17.  Dušan Petrovački, Filip Kulić, Veroslav Janković, „Measurement and monitoring – base for improvement of energy efficiency in industry“, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe – IEEP 2010, Zlatibor, 22-26. June, 2010.

18.  S. Luković, I. Kaitović, M. Mura, U. Bondi, F. Kulić, D. Popović, „Functional model of Virtual Power Plant (VPP)“, Proceedings of CIGRE Session 2010 (ISBN 978-2-85873-107-7), Paris, France. 22 - 27 August 2010.

19.  Slobodan Luković, Velimir Čongradac, Filip Kulić, „A System Level Model of Possible Integration of Building Management System in SmartGrid“, Proc. of Complexity in Engineering, 2010. COMPENG '10, pp: 58 – 60, 22-24 Feb. 2010, Rome, Italy, Print ISBN: 978-1-4244-5982-7,

20.  Srđan Vukmirovic, Aleksandar Erdeljan, Filip Kulić, Slobodan Lukovic, „Software architecture for Smart Metering systems with Virtual Power Plant“, Proc. of MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference, Digital Object Identifier: 10.1109/MELCON.2010.5476237, Page(s): 448 – 451, 2010.

21.  Dragan Matić, Boris Dumnić, Filip Kulić, Veran Vasić, „Comparative Analise Of Optimal Mras Speed Identification“ Proc. of 15th International Symposium On Power Electronics - Ee 2009 (on CD), Novi Sad, October 28-30, 2009

22.  V. Vasic, D. Marcetic, DJ. Oros, F. Kulic, ” Prediction of Local Instabilities caused by Inverter Dead Time in AC drive”, 13th European Conference on Power Electronics and Applications EPE 2009, 8-10.Sept, Barcelona, Spai7,.

23.  Filip Kulić, Velimir Čongradac, Đura Oros, Veran Vasić; “Smart grid – concepts and realization of smart energy networks”, Second International Conference “Sustainable Postharvest and Food Technologies – INOPTEP 2011”, Velika Plana, Srbija, 17-22. april 2009.

24.  V.Bugarski, P.Nikolic, F.Kulic, “Realization of Control of Pneumatic System for Positioning of Nozzle Based on Fuzzy Logic”, 9th Symposium on Neural Network Applications in Electrical Engineering, NEUREL-2008, Faculty of Electrical Engineering, University of Belgrade, Serbia, September 25-27, 2008.

25.  Lj.Francuski, F.Kulic, B.Dumnic, Dj.Oros, “Fuzzy PI Controller for Vector Control of Induction Machine”, 9th Symposium on Neural Network Applications in Electrical Engineering, NEUREL-2008, Faculty of Electrical Engineering, University of Belgrade, Serbia, September 25-27, 2008.

26.  D.Matic, B.Dumnic, F.Kulic, V.Vasic,” GA optimization of PI controller in MRAS structure for induction motor speed estimation”, 9th Symposium on Neural Network Applications in Electrical Engineering, NEUREL-2008, Faculty of Electrical Engineering, University of Belgrade, Serbia, September 25-27, 2008.

27.  V.Bugarski, F.Kulic, J.Djurdjulov, V.Vasic, “Speed Control of Induction Machine using dual Fuzzy Logic Controller” 50th International Symposium ELMAR-2008;10-13 September 2008, Zadar, Croatia

28.  A.Selakov, F.Kulic, P.Nikolic, D.Petrovacki, “Improving of supervisory and control system in process industry by web and gsm technologies”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

29.  P.Nikolic, V.Bugarski, F.Kulic, Z.Jelicic, “Control of electric power consumption in compressor station in cooling plant”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

30.  D.Matic, F.Kulic, P.Nikolic, N.Stojakovic, “Application of genetic algorithm for tuning of PI controller parameters in process industry”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

31.  D.Matic, V.Bugarski, F.Kulic, Z.Jelicic, “One realization of fuzzy controller for electric drives” Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

32.  J.Lugonja, F.Kulic, Lj.Francuski, V.Jankovic, “Prediction of electric power consumption in process industry using support vector machines”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

33.  V.Bugarski, Lj.Francuski, F.Kulic, “Realization of supervisory and control system in cooling plant”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

34.  M.Petrujkic, Z.Jelicic, F.Kulic, O.Papic, “Electric Power Consumption Prediction in Oil Production Using Support Vector Machines”, Regional conference Industrial energetic and environmental protection in countries of Southeast Europe IEEP 2008, 24-27. juni 2008. Zlatibor, Srbija

35.  V.Jankovic, D.Urosevic, F.Kulic, D.DJukanovic, “Implementation of a clean development mechanism methodology in biogas/natural gas chp plant”, International symposium Energetic 2008; Zlatibor 25-28.03.2008.

36.  A.Selakov, F.Kulic, “Realization of the new automatic control system for mineral compost production process“, 14th International Symposium on Power Electronics EE 2007, Novi Sad, 7-9. November, 2007, str. 1- 5, UDK: 621.38:620.9(048.3)(082),

37.  F.Kulic, D.Petrovacki, Z.Jelicic, M.Sokola: “Computational Intelligence Based Control of Sensorless DC Drive at Low Speeds”, Proceedings of Control 2004., 6-9. September 2004., Bath, UK.

38.  D.Petrovacki, Z.Jelicic, F.Kulic: “Use of the standard ISA S5.1 for conceptual design of technological facilities in the factory of floor covers Sintelon”, PSU-UNS International Conference on Engineering and Environment 2003, December 11-12. 2003., Hat-Yai, Songkhla, Thailand.

39.  F.Kulic, D.Popovic: "Monitoring of Power System Stability Using Reduced System Model", V International Symposium of Interdisciplinary Regional Research, 4-6. X 2001, Szeged, Hungary.

40.  D.Popovic, F.Kulic: "On line monitoring and preventing of voltage stability using reduced system model", Proceedings of International Symposium Bulk Power System Dynamics and Control V - IREP 2001, pp.319-332, 26-31. VIII 2001, Onomichi, Japan

41.  F.Kulic, D.Kukolj, E.Levi: "Artificial Neural Networks as a Gain Scheduler for PI Speed Controller in DC Motor Drives", Proc. of 5th Seminar on Neural Network Application in Electrical Engineering NEUREL 2000, pp.199-203, Belgrade, 25-27. IX 2000.

42.  D.Kukolj, F.Kulic, E.Levi: "Artificial Intelligence Based Gain Scheduling of PI Speed Controller in DC Motor Drives", Proceedings of the ISIE 99, Vol.1, pp.425-429, Bled- Slovenia, July 12-16, 1999.

43.  D.Kukolj, M.Borota-Nedic, M.Berko, F.Kulic: “Postprocessing of the System States with Self-organized neural Network", VI International SAUM Conference Proceedings, pp.453-456, Nis, September 28-30, 1998.

44.  D.Kukolj, F.Kulic, M.Borota-Nedic, E.Levi; "DC Motor Speed Estimation Using Artificial Neural Networks", 4th Balkan Conference on Operational Research, 20-23 October 1997., Thessaloniki, Greece

45.  D.Popovic, D.Kukolj, F.Kulic; "Monitoring of Voltage Stability Margins Using Artificial Neural Networks with a Reduced Input Set", UPEC '97, Proceedings Vol. 2, pp.875-878, 10-12th September 1997, Manchester, UK

46.  D.Kukolj, M.Berko, M.Borota, F.Kulic; "Process Fault Diagnosis Using Artificial Neural Networks", Proceeding CONTI '96, pp.149-154, 14.-16. November 1996, Timisoara, Romania.

 

VII PROJECTS:

a.      Research projects:

Title:	ENERGY EFFICIENCY IN INDUSTRY – AUTOMATIC CONTROL IN INDUSTRY
Financing:	National program in energy efficiency
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2003-2005.
Duties:	·         Development of solution for electric power saving in industry
Title:	INFORMATION AND CONTROL SYSTEM OF WATERING SYSTEMS IN SERBIAN CITIES
Financing:	National program of water resources treatment
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2004-2007.
Duties:	·         Development of automatic control systems and SCADA for watering systems of cities in Serbia
Title:	ENERGY EFFICIENCY IN INDUSTRY – APPLICATION OF CONTEMPORARY CONTROL AND INFORMATION TECHNOILOGIES IN ENERGY MANAGEMENT SYSTEMS IMPROVING
Financing:	National program in energy efficiency
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2005-2008.
Duties:	·         Development of solution for improving of actual energy management systems in industry ·         Project manager
Title:	ENERGY EFFICIENCY IN INDUSTRY – INTEGRAL CONTROL OF ENERGY FLOW IN OIL REFINERY NOVI SAD
Financing:	National program in energy efficiency
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2005-2008.
Duties:	·         Development of solution for improving of actual energy management systems in oil refining industry
Title:	EXPLORATION OF SAILING CONDITIONS AT HYDRO SYSTEM DANUBE-TISA-DANUBE CHANNEL NETWORK WITH THE DETERMINATION OF THE BEST PARAMETERS OF CHANNEL TRAFFIC WITHIN THE SCOPE OF TRANSPORTATION SYSTEM IN SERBIA
Financing:	Republic of Serbia national program of technological development
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2005-2007.
Duties:	·         Member of research team
Title:	POWER PLANTS ROBUSTIFICATION BY FAULT DIAGNOSIS AND ISOLATION TECHNIQUES - PRODI
Financing:	FP7 STREP
Main Contractor:	European Commission, Brussels, Belgium
Elaboration:	Electro technical Faculty, Belgrade, Serbia
Time:	2008-2010.
Duties:	·         Member of research team
Title:	EXPERT SYSTEM FOR DECISION SUPPORT IN ADVISORY SERVICES FOR THE IMPROVEMENT OF SOIL QUALITY
Financing:	World Bank agriculture supporting program
Main Contractor:	Ministry of agriculture of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2010-2011.
Duties:	·         Project menager
Title:	INTELLIGENT CONTROL AND MONITORING SYSTEM FOR THE EARLY DETECTION AND ELIMINATION OF UNWANTED STATUS AND CHANGES ON DEVICES, EQUIPMENT AND PROCESSES IN THE PROCESS INDUSTRY
Financing:	Republic of Serbia national program of technological development
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2011-2016.
Duties:	·         Member of research team
Title:	THE DEVELOPMENT OF INTELLIGENT SUPERVISORY AND CONTROL SYSTEM TO INCREASE THE ENERGY EFFICIENCY OF BUILDINGS
Financing:	Republic of Serbia national program of technological development
Main Contractor:	Ministry of science and technology of Republic Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2011-2016.
Duties:	·         Project manager
Title:	CENTER OF EXCELLENCE FOR ADVANCED AND INTELLIGENT CONTROL
Financing:	Europe Commission
Main Contractor:	Iterreg IPA SRB/HU
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	2013-2014.
Duties:	·         Member of project team
Title:	DANUBE UNIVERSITIES
Financing:	Ministry of Science, Research and Arts Baden-Württemberg; Germany
Main Contractor:	Ulm University of Applied Sciences; Ulm; Germany
Elaboration:	Ulm University of Applied Sciences; Ulm; Germany
Time:	2012-present
Duties:	·         Member of smart grid project team

 

b.      Study projects:

Title:	GENERAL PROJECT OF DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR WATER DISTRIBUTION IN NOVI SAD WATER SUPPLYING SYSTEM
Financing:	Water supplying company, Novi Sad, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2000.
Duties:	·         Development of the control algorithms

 

Title:	GENERAL PROJECT OF DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR WATERING AND SEWERAGE SYSTEM IN SUBOTICA
Financing:	Water supplying company, Subotica, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2006.
Duties:	·         Development of the control algorithms, ·         Project managing
Title:	EARLY WARNING SYSTEM FOR THE SURFACE WATER QUALITY MONITORING OF THE RIVERS IN SERBIA
Financing:	Ministry of science and environmental protection of
	Republic Serbia
Main Contractor	Ecology Directorate of the Ministry of science and
	environmental protection
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	January 2007.
Duties:	·         Development of the control algorithms, ·         Project managing
Title:	FEASIBILITY STUDY OF INVESTMENT IN ENERGY MANAGEMENT SYSTEM FOR FARMAKOM MB CONCERN
Financing:	Farmakom MB, Šabac, Serbia
Main Contractor	Schneider electric Serbia, Belgrade, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	May 2008.
Duties:	·         Feasibility study team leader

 

c.       Reviewer for the following projects:

Title:	BIODIESEL PLANT (DESIGNING; PROJECTING AND ERECTING)
Financing:	Victoriagroup, Novi Sad, Serbia
Elaboration:	Lurgi AG, Frankfurt am Main, Germany
Time:	January 2007.
Duties:	Technical control of documentation and works in area of automatic control (instrumentation, cabling, assembling and functionality of DCS)
Title:	VEGETABLE OIL REFINING PLANT (DESIGNING, PROJECTING AND ERECTING)
Financing:	Victoriagroup, Novi Sad, Serbia
Elaboration:	Lurgi AG, Frankfurt am Main, Germany
Time:	January 2007.
Duties:	Technical control of documentation and works in area of automatic control (instrumentation, cabling, assembling and functionality of DCS)

VIII MEMBERSHIP IN PROFESSIONAL ASSOCIATIONS:

a.      International associations:

Institution:	IEEE, THE INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS
Grade:	MEMBER
Institution:	CIGRE, THE COUNCIL ON LARGE ELECTRIC SYSTEMS
Grade:	MEMBER

b.      Serbian associations:

Institution:	YUGOSLAV CHAMBER OF ENGINEERS
Grade:	MEMBER
Institution:	NATIONAL SOCIETY OF PROCESSING AND ENERGY IN AGRICULTURE
Grade:	VICEPRESIDET

IX AWARDS:

-

X REFERENCES:

Title:	MAIN PROJECT FOR CONTROL OF ELECTRIC MOTOR DRIVES - AUTOMATION, MEASUREMENT AND CONTROL, AND INSTRUMENTATION, IN THE PROCESS OF NITROGEN BASED FERTILIZER PRODUCTION
Financing:	Nitrogen processing plant “HIP Azotara”, Pančevo, Serbia
Elaboration:	FTN IDEEA doo, Novi Sad
Time:	June 2014 – January 2016.
Duties:	·         Responsible designing engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT OF AUTOMATIC CONTROL AND SCADA SYSTEM FOR PEELING PLANT IN VEGETABLE OIL PLANT
Financing:	Vegetable oil plant “Dijamant”, Zrenjanin, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	July 2014.
Duties:	·         Responsible designing engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT OF POWER AND AUTOMATIC CONTROL SYSTEM RECONSTRUCTION FOR SREMSKI KARLOVCI WATER DISTRIBUTION WAY IN NOVI SAD WATER SUPPLYING SYSTEM
Financing:	Water supplying company, Novi Sad, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2002.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT OF POWER AND AUTOMATIC CONTROL SYSTEM RECONSTRUCTION FOR SREMSKA KAMENICA WATER DISTRIBUTION WAY IN NOVI SAD WATER SUPPLYING SYSTEM
Financing:	Water supplying company, Novi Sad, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2003.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT OF AUTOMATIC PACKAGING LINE IN TILE INDUSTRY POTISJE, KANJIZA
Financing:	Potisje, Kanjiza, Serbia & Montenegro
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	November 2003.
Duties:	·         Responsible planning engineer ·         Development of the control algorithms
Title:	VOLTAGE/VAR CONTROL IN LAJES COMPLEX
Financing:	Light (Brazilian electrical company)
Main Contractor:	Telvent,Seville,Spain
Elaboration:	DMS GroupLtd,NoviSad,Serbia
Time:	2004.
Duties:	·         Development of solution for reactive power/voltage control (Voltage/VAR Control) in Lajes Complex in Brazil ·         Secondary Voltage/VAR Control
Title:	MAIN PROJECT OF AUTOMATIC CONTROL SYSTEM FOR LEDINCI WATER DISTRIBUTION WAY IN NOVI SAD WATER SUPPLYING SYSTEM
Financing:	Water supplying company, Novi Sad, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	August 2004.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT OF AUTOMATIC CONTROL SYSTEM FOR FRUSKA GORA WATER DISTRIBUTION WAY IN NOVI SAD WATER SUPPLYING SYSTEM
Financing:	Vegetable Oil
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2006.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms,
Title:	MAIN PROJECT AND REALIZATION OF AUTOMATIC CONTROL AND SCADA SYSTEM FOR PRESSING PLANT IN VEGETABLE OIL PLANT
Financing:	Vegetable oil plant “Mladost”, Sid, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	January 2006.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms, Project managing.
Title:	MAIN PROJECT AND REALIZATION OF AUTOMATIC CONTROL AND SCADA SYSTEM FOR EXTRACTION PLANT IN VEGETABLE OIL PLANT
Financing:	Vegetable oil plant “Mladost”, Sid, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	January 2006.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms, ·         Project managing.
Title:	MAIN PROJECT AND REALIZATION OF AUTOMATIC CONTROL AND SCADA SYSTEM FOR PEELING PLANT IN VEGETABLE OIL PLANT
Financing:	Vegetable oil plant “Mladost”, Sid, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	September 2006.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms, ·         Project managing.
Title:	MAIN PROJECT AND REALIZATION OF AUTOMATIC CONTROL AND SCADA SYSTEM FOR MINERAL COMPOST PLANT
Financing:	Mineral compost plant “Fertil”, Backa Palanka, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	January 2007.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms, ·         Project managing.
Title:	MAIN PROJECT OF DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR WATERING SYSTEM IN SUBOTICA – PHASE I
Financing:	Water supplying company, Subotica, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2006.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms,

 

Title:	MAIN PROJECT AND REALIZATION OF DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR COOLING PLANT ELIXIRFOOD SABAC
Financing:	Elixir food, Sabac, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	May 2007.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms ·         Software realization,
Title:	REALIZATION OF SOFTWARE FOR DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR LPG DECANTIZATION PLANT IN OIL REFINERY NOVI SAD
Financing:	Oil Refinery, Novi Sad, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2007.
Duties:	·         Software realization,
Title:	PRELIMINARY DESIGN OF AUTOMATION OF HEATING SUBSTATION AND SUPERVISORY AND CONTROL SYSTEM FOR SUBSTATIONS IN PUBLIC UTILITY COMPANY “TOPLOVOD” OBRENOVAC
Financing:	Public Utility Company “Toplovod”, Obrenovac, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	December 2008.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms

 

Title:	MAIN PROJECT OF CENTRALIZED SUPERVISORY AND CONTROL SYSTEM IN BUSINESS BUILDING – IMEL GROUP
Financing:	Imel Group, Belgrade, Serbia
Elaboration:	ION Solutions, Novi Sad, Serbia
Time:	2007.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms

 

Title:	MAIN PROJECT OF CENTRALIZED SUPERVISORY AND CONTROL SYSTEM IN BUSINESS BUILDING – M- IVEST
Financing:	M-Invest, Belgrade, Serbia
Elaboration:	Vector Engineering, Belgrade, Serbia
Time:	2008.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms
Title:	MAIN PROJECT OF CENTRALIZED SUPERVISORY AND CONTROL SYSTEM IN CITY MUSEUM “CONCORDIA” VRSAC
Financing:	Local government Vrsac, Serbia
Elaboration:	ION Solutions, Novi Sad, Serbia
Time:	2008.
Duties:	·         Responsible planning engineer, ·         Development of the control algorithms
Title:	MAIN PROJECT AND REALIZATION OF SOFTWARE FOR DATA ACQUISITION, SUPERVISORY AND CONTROL SYSTEM FOR SOYA FLOUR AND CHYME PLANT AND SOYA BEEN PROTEIN PLANT IN SOYA BEEN PROCESSING FACTORY
Financing:	Sojaprotein, Becej, Serbia
Elaboration:	Faculty of Technical Sciences, Novi Sad, Serbia
Time:	October 2008. – November 2009.
Duties:	·         Main project of automation system ·         Software realization team leader
Title:	SOFTWARE SOLUTION FOR AUTOMATIC GENERATION CONTROL FUNCTION OF ENERGY MANAGEMENT SYSTEMS IN OIL REFINERIES
Financing:	Telvent, Seville, Spain
Elaboration:	DMSgroup, Novi Sad, Serbia
Time:	April 2009
Duties:	·         Control algorithm developing ·         Software developing team leader

 

Title:	SOFTWARE SOLUTION FOR ECONOMIC DISPATCHING FUNCTION OF ENERGY MANAGEMENT SYSTEMS IN OIL REFINERIES
Financing:	Telvent, Seville, Spain
Elaboration:	DMSgroup, Novi Sad, Serbia
Time:	June 2009
Duties:	·         Control algorithm developing ·         Software developing team leader
Title:	SOFTWARE SOLUTION FOR INTERCHANGE TIME SCEDULING FUNCTION OF ENERGY MANAGEMENT SYSTEMS IN OIL REFINERIES
Financing:	Telvent, Seville, Spain
Elaboration:	DMSgroup, Novi Sad, Serbia
Time:	November 2009
Duties:	·         Control algorithm developing ·         Software developing team leader

XI TECHNICAL SOLUTIONS

Title:	ENERGY MANAGEMENT SYSTEM IN SOJAPROTEIN AD BECEJ
Financing:	Victoriagroup doo., Novi Sad
User:	Sojaprotein AD, Becej
Time:	2005.
Duties:	·         Control algorithm developing ·         Project managing. ·         Energy management system realization team leader
Title:	SUPERVISORY AND CONTROL SYSTEM FOR PRODUCTION PROCESS OF VEGETABLE OIL FROM SUNFLOWER, SOYA AND RAPE SEED IN OIL FACTORY MLADOST SID
Financing:	Victoriagroup doo., Novi Sad
User:	Oil factory Mladost, Sid
Time:	2006.
Duties:	·         Control algorithm developing ·         Project managing. ·         Software part of the system realization team leader
Title:	SUPERVISORY AND CONTROL SYSTEM FOR PRODUCTION PROCESS OF MINERAL COMPOST BY COMPACTION TECHNIQUE IN FACTORY FERTIL BACKA PALANKA
Financing:	Victoriagroup doo., Novi Sad
User:	Mineral compost factory Fertil
Time:	2007.
Duties:	·         Control algorithm developing ·         Project managing. ·         Software part of the system realization team leader